Product Description


$3,200.00 inc. gst
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through back stays), back stays, lateral bars (front legs), windscreen top cross bar, bent back harness bar (including eyelets for driver/passenger), and single door bars.
- Mid Level specification – State Level race meetings, Rally or Drifting
- NOTE:
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- Pricing below includes the additional gussets where applicable.
Description
Notes:
- AGI Bolt-in roll cage kits are painted in a Satin Black (low glare) finish.
- Roll cage kits come complete with lower plates and high tensile fasteners.
- Roll Cage tubing is Motorsport Australia (CAMS) compliant 350 MPA CDS Mild Steel. MIG Welded.
- Motorsport Australia (CAMS) Roll Cage registration documentation is provided with completed roll cage kit. Please advise your vehicle VIN / chassis number when the build is complete so that we can complete the necessary Motorsport Australia (CAMS) paperwork.
- Please note that the regulations have changed for Motorsport Australia (CAMS) approved roll cages from JAN 2012. Additional bar work is required at a National level while some existing roll cage coupling designs have now been outlawed. Our 2015 spec roll cage kits meet the new requirements.
- If you’re intending to fit the kit yourself, please note that all our bolt-in roll cages are pre-drilled (roll cage connector to corresponding tube) unlike some kits on the market. We also check for accuracy and fitment on our in-house roll cage jig (see attached photo). If you’re comparing our roll cages to that of a rival product, please make sure your comparing like for like. Some bolt-in kits are not CAMS compliant while other kits don’t simply ‘bolt-in’ as suggested and require days of modification to install.
- Please note that payment in full (for the roll cage kit) is required when ordering. Fitment or freight can be invoiced upon completion if preferred.
- An Electronic Bank Transfer (EFT) for payment is preferred although we can also take a credit card payment over the phone.
CAMS spec – BOLT-IN - Roll cage kit – Lead times (Jan 2021)
Currently taking orders for March 2021
Please advise us if you’re competing within the time frame listed above so we can look to have your cage ready a little earlier so you don’t miss your first event.
Related Products
- High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Gravel Rally, Tarmac Rally events such as Targa Tasmania, Drifting, or ANDRA Drag Racing (down to 8.0 sec 1/4 mile)
- Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), single door bars, roof reinforcement bars, windscreen pillar support bars including gusset between pillar bar and door bar.
- High Level specification – National Level Race meetings and racing at Bathurst (for cars log booked after 2012)
- NOTE:
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- Pricing below includes the additional gussets where applicable.
- Weld-in mounts
- High Level specification – National Level race meetings, Drifting or ANDRA spec Drag racing
- High Level specification – National Level race meetings, National level Rally, Tarmac Rally events, Drifting, ANDRA Drag Racing (down to 8.0 sec 1/4 mile).
- High Level specification – National Level Race meetings, National Rallies, Tarmac Rally events or Drifting
- Mid Level specification – State Level race meetings or Drifting
- Entry Level specification – Super Sprints or Track Days
- NOTE:
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- Pricing below includes the additional gussets where applicable.
- Weld-in mounts
- High Level specification – National level Race meetings, National Rally , Tarmac Rally events or racing at Bathurst (for cars log booked post 2012)
- High Level specification – National Level Race meetings, racing at Bathurst or ANDRA spec racing (down to 8.0 sec 1/4 mile)
- Mid Level specification – State Level Race meetings or Drifting
- Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), double door bars with gussets, roof reinforcement bars, windscreen pillar support bars including gussets between pillar bar and door bars.
- High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Gravel Rallies, or Tarmac Rally events such as Targa Tasmania
- NOTE:
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- Pricing below includes the additional gussets where applicable.
- Weld-in mounts
- High Level specification – National Level race meeting or Drifting
- Entry Level specification – Sprints or Track Days
- NOTE:
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- This pricing includes the additional gussets where applicable.
-
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- This pricing includes the additional gussets where applicable.
-
- This pricing includes the additional gussets where applicable.
- Mid Level specification – State Level race meetings or Drifting
- High Level specification – National Level Race meetings, Gravel Rally, Tarmac Rally events such as Targa Tasmania, racing at Bathurst (for cars log booked with CAMS after 2012), or Drifting.
- High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Gravel Rally, Tarmac Rally events such as Targa Tasmania, Drifting, or ANDRA spec Drag Racing (down to 8.0 sec 1/4 mile)
- Mid Level specification – State Level Race meetings
- NOTE:
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- This pricing includes the additional gussets where applicable.
- Mid Level specification – State Level Race meetings or Drifting
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- This pricing includes the additional gussets where applicable.
- Mid Level specification – State Level race meetings or Drifting
- High Level specification – National Level race meetings, Drifting or ANDRA Drag Racing (down to 8.0 sec 1/4 mile).
- High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Tarmac Rally events such as Targa Tasmania, Gravel Rallies and ANDRA spec Drag racing (down to 8.0 sec down the 1/4 mile).
- NOTE:
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- This pricing includes the additional gussets where applicable.
- Entry Level specification – Sprints, Track Days or Drifting
- NOTE:
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- Pricing below includes the additional gussets where applicable.
- High Level specification – National Level race meetings, Rallies or Tarmac events
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), single door bars, roof reinforcement bars, windscreen pillar support bars, double diagonals through back stays.
- High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Drifting, or ANDRA spec Drag Racing (down to 8.0 sec 1/4 mile)
- Mid Level specification – State Level race meetings or Drifting
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- This pricing includes the additional gussets where applicable.
- Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), double door bars with gussets.
- Mid Level specification – State Level Race meetings
- NOTE:
- All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
- Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
- Pricing below includes the additional gussets where applicable.
- Weld-in mounts
- High Level specification – National Level Race meetings, Drifting, or ANDRA Drag Racing (down to 8.0 sec 1/4 mile)
- High Level specification – National Level race meetings, Rallies or Tarmac events
- Mid Level specification – State Level Race meetings or Drifting