(02) 9605 4411 | Buy Roll Cages Online

(B) Toyota Sprinter AE86 – 6pt – Full cage Bolt in

Return to Previous Page

Product Description

(A) Toyota Sprinter AE86 - 4pt - Half Cage - Bolt in $1,450.00 inc. gst
(C) Toyota Sprinter AE86 - 6pt - Full cage Bolt in $3,100.00 inc. gst

$2,695.00 inc. gst

Full Cage (6 point) Bolt-in – Main hoop, diagonal brace (through hoop), back stays, lateral bars (front legs), windscreen top cross bar, single door bar, harness bar.

[PICTURE IS SAMPLE ONLY]

  • Entry Level specification – Sprints, Track Days or Drifting
  • NOTE:
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • Pricing below includes the additional gussets where applicable.

     

Harness eyebolts and sleeves (sleeves welded in position)

Vehicle Specs * 

Select the option which best describes your vehicle’s interior. If your interior is not listed please contact us.

Roll Cage Use * 

What type of events will the roll cage be used in?

Categories: , , ,
Description

Description

33

Notes:

  • AGI Bolt-in roll cage kits are painted in a Satin Black (low glare) finish.
  • Roll cage kits come complete with lower plates and high tensile fasteners.
  • Roll Cage tubing is Motorsport Australia (CAMS) compliant 350 MPA CDS Mild Steel. MIG Welded.
  • Motorsport Australia (CAMS) Roll Cage registration documentation is provided with completed roll cage kit. Please advise your vehicle VIN / chassis number when the build is complete so that we can complete the necessary Motorsport Australia (CAMS) paperwork.
  • Please note that the regulations have changed for Motorsport Australia (CAMS) approved roll cages from JAN 2012. Additional bar work is required at a National level while some existing roll cage coupling designs have now been outlawed. Our 2015 spec roll cage kits meet the new requirements.
  • If you’re intending to fit the kit yourself, please note that all our bolt-in roll cages are pre-drilled (roll cage connector to corresponding tube) unlike some kits on the market. We also check for accuracy and fitment on our in-house roll cage jig (see attached photo). If you’re comparing our roll cages to that of a rival product, please make sure your comparing like for like. Some bolt-in kits are not CAMS compliant while other kits don’t simply ‘bolt-in’ as suggested and require days of modification to install.
  • Please note that payment in full (for the roll cage kit) is required when ordering. Fitment or freight can be invoiced upon completion if preferred.
  • An Electronic Bank Transfer (EFT) for payment is preferred although we can also take a credit card payment over the phone.
Current Lead Times

CAMS spec – BOLT-IN - Roll cage kit – Lead times (Jan 2021)

Currently taking orders for March 2021

Please advise us if you’re competing within the time frame listed above so we can look to have your cage ready a little earlier so you don’t miss your first event.

Related Products

AGI - Nissan Skyline R33 - 2020 MA spec 4pt Bolt-in Half cage - Option A
Quick View
, , ,
(A) Nissan Skyline R33 – 2 door – Half Cage (4 point) Bolt-in
Half Cage (4 point) Bolt-in – Main Hoop, single diagonal brace (through hoop), back stays and harness bar.
  • Entry Level specification – Sprints, Track Days or Drifting
$1,300.00 inc. gst
AGI - Nissan Silvia S13 - 2019 CAMS spec National level Bolt-in - Option E
Quick View
, ,
(E) Nissan 180 SX – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), single door bars, roof reinforcement bars, windscreen pillar support bars.
  • High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Drifting, or ANDRA spec Drag Racing (down to 8.0 sec 1/4 mile)
$4,950.00 inc. gst
AGI-Nissan-Silvia-S14-2018-CAMS-spec-Bolt-in-Half-cage-Option-A
Quick View
, , ,
(A) Nissan Silvia S14 – 2 door – Half Cage (4 point) Bolt-in
Half Cage (4 point) Bolt-in – Main Hoop, diagonal brace (through hoop), back stays and harness bar. Requires weld-in hoop mounts that are included in the kit.
  • Entry Level specification – Sprints, Track Days or Drifting
$1,450.00 inc. gst
Quick View
, , ,
(B) Nissan Skyline R32 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, diagonal brace (through hoop), backstays, lateral bars (front legs), windscreen top cross bar, harness bar. [PICTURE IS SAMPLE ONLY]
  • Entry Level specification – Super Sprints, Track Days or Drifting
$2,200.00 inc. gst
Quick View
, , ,
(D) Nissan Skyline R32 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop), backstays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, single door bars, roof reinforcement bars, windscreen pillar support bars.
  • High Level specification – National Level race meetings, Rallies or Tarmac events
$3,800.00 inc. gst
Quick View
, , ,
(C) Nissan Skyline R34 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, and single door bars
  • Mid Level specification – State Level Race meetings or Drifting
$3,100.00 inc. gst
Quick View
, , ,
(B) Nissan Skyline R34 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, diagonal brace (through hoop), back stays, lateral bars (front legs), windscreen top cross bar, harness bar. [PICTURE IS SAMPLE ONLY]
  • Entry Level specification – Sprints, Track Days or Drifting
$2,200.00 inc. gst
Quick View
, , ,
(C2) Nissan Pulsar N14 – 6 pt – Full cage – Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, and single door bars per side.
  • Mid Level specification – State Level race meetings
$3,100.00 inc. gst
Nissan Skyline R31 - Roll Cage - option A
Quick View
, , ,
(A) Nissan Skyline R31 – 4 door – Half Cage (4 point) Bolt-in
Half Cage (4 point) Bolt-in – Main Hoop, diagonal brace (through hoop), backstays and harness bar.
  • Entry Level specification – Super Sprints, Track Days or Drifting
$1,300.00 inc. gst
AGI - Nissan Skyline R33 - 2021 MA spec State level Bolt-in Roll Cage + double door bars - Option D
Quick View
, , ,
(D) Nissan Skyline R33 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, backstays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), and double 'X' door bars with gussets. 
  • Mid Level specification – State Level race meetings or Drifting
$3,800.00 inc. gst
AGI - Nissan Skyline R31 - 2020 MA spec National level Bolt-in Roll Cage - Option F
Quick View
, , ,
(F) Nissan Skyline R31 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, double door bars with gussets with gussets, roof reinforcement bars, windscreen pillar support bars.
  • High Level specification – National Level Race meetings, Gravel Rallies, Tarmac events, racing at Bathurst, or ANDRA spec Drag racing (down to 8.0 sec 1/4 mile). 
$5,500.00 inc. gst
Quick View
, , ,
(E) Nissan Skyline R34 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop), back stays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, single door bars, roof reinforcement bars, windscreen pillar support bars. [PICTURE IS SAMPLE ONLY]
  • High Level specification – National Level race meeting or Drifting
$5,060.00 inc. gst
Quick View
, , ,
(E) Nissan Skyline R32 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop), backstays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, double door bars, roof reinforcement bars, windscreen pillar support bars.
  • High Level specification – National Level race meetings, Rallies or Tarmac events
$5,060.00 inc. gst
AGI-Ford-Focus-2nd-Gen-2019-CAMS-spec-Bolt-in-Half-cage-double-diagonals-Option-A-in-car-front
Quick View
, , ,
(A) Ford Focus Mk2 RS – Half Cage (4 point) Bolt-in
Half Cage (4 point) Bolt-in – Main Hoop, diagonal brace (through hoop), back stays and harness bar. (Double diagonal braces pictured are extra)
  • Entry Level specification – Sprints or Track Days
  • NOTE:
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • This pricing includes the additional gussets where applicable.
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • This pricing includes the additional gussets where applicable.
    • This pricing includes the additional gussets where applicable.
$1,450.00 inc. gst
AGI - Nissan Skyline R31 - 2020 MA spec State level + double door bars - Option D
Quick View
, , ,
(D) Nissan Skyline R31 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, backstays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, and double door bars with gussets. 
  • Mid Level specification – State Level race meetings or Drifting 
$3,800.00 inc. gst
Quick View
, , ,
(C) Nissan Skyline R34 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, backstays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, and single door bars
  • Mid Level specification – State Level race meetings or Drifting
$3,100.00 inc. gst
Quick View
, , ,
(F) Nissan Skyline R34 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, backstays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, double 'X' door bars with gussets, roof reinforcement bars, windscreen pillar support bars.
  • High Level specification – National Level race meetings, Drifting, Gravel Rallies or Tarmac Rally events
$5,500.00 inc. gst
AGI - Nissan 180SX - 2021 MA spec State level Bolt-in - Option C
Quick View
, , ,
(C) Nissan Silvia S13 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), and single door bars per side.
  • Mid Level specification – State Level Race meetings or Drifting
$3,200.00 inc. gst
Quick View
, , ,
(B) Mini (Classic) – Full cage 6pt Bolt-In
Full Cage (6 point) Bolt-in – Main hoop, diagonal brace (through hoop), backstays, lateral bars (front legs), windscreen top cross bar, harness bar.
  • Entry Level specification – Super Sprints or Track Days
  • NOTE:
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • Pricing below includes the additional gussets where applicable.
    • Weld-in mounts
$2,500.00 inc. gst
Quick View
, , ,
(E) Mini (Classic) – Full cage 6pt Bolt-In
  • Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), single door bars, roof reinforcement bars, windscreen pillar support bars including gusset between pillar bar and door bar.
[PICTURE IS EXAMPLE ONLY]
  • High Level specification – National Level Race meetings and racing at Bathurst (for cars log booked after 2012)
  • NOTE:
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • Pricing below includes the additional gussets where applicable.
    • Weld-in mounts
$5,280.00 inc. gst
AGI - Nissan Pulsar N14 - 2016 CAMS spec Bolt-in Half cage - Option A (floor pic - front)
Quick View
, , ,
(A) Nissan Pulsar N14 – 4 pt – Half cage – Bolt in
Half Cage (4 point) Bolt-in – Main Hoop, single diagonal brace (through hoop), back stays and harness bar.
  • Entry Level specification – Super Sprints or Track Days
   
$1,300.00 inc. gst
AGI-Nissan-Skyline-R32-2022-MA-spec-National-level-Bolt-in-Roll-Cage-Option-E
Quick View
, , ,
(E) Nissan Skyline R32 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts fitted (suit clip on harness), single door bars, roof reinforcement bars, windscreen pillar support bars with gussets.
  • High Level specification – National Level Race meetings, Drifting, or ANDRA Drag Racing (down to 8.0 sec 1/4 mile)
$4,950.00 inc. gst
Quick View
, , ,
(B) Nissan Skyline R33 – 2 door – Full Cage (6 point) Bolt-in
 Full Cage (6 point) Bolt-in – Main hoop, diagonal brace (through hoop), back stays, lateral bars (front legs), windscreen top cross bar, harness bar. [PICTURE IS SAMPLE ONLY]
  • Entry Level specification – Sprints or Track Days
$2,200.00 inc. gst
AGI-Nissan-Silvia-S13-2019-CAMS-spec-National-level-Bolt-in-Roll-Cage-Option-F
Quick View
, ,
(F) Nissan 180 SX – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, double 'X' door bars with gussets, roof reinforcement bars, windscreen pillar support bars, and gussets between pillar bar and door bars.
  • High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Gravel Rally, Tarmac Rally events such as Targa Tasmania, Drifting, or ANDRA Drag Racing (down to 8.0 sec 1/4 mile)
$5,500.00 inc. gst
Quick View
, , ,
(B) Holden VU-VZ Ute – 6pt – Full Cage Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, diagonal brace (through backstays), backstays, lateral bars (front legs), windscreen top cross bar, harness bar and single door bars.
  • Entry Level specification – Supersprints, Track Days or Drifting
NOTE:
  • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
  • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
  • This pricing includes the additional gussets where applicable.
$2,695.00 inc. gst
Quick View
, , ,
(A) Nissan 370Z – 4 pt – Bolt in
Half Cage (4 point) Bolt-in – Main Hoop, removeable diagonal brace (through back stays), back stays and bent harness bar.
  • Entry Level specification – Sprints or Track Days.
  • Includes 2 x weld-in mounts for the main roll hoop to fasten down to.
$1,600.00 inc. gst
AGI-Nissan-Silvia-S13-2019-CAMS-spec-National-level-Bolt-in-Option-E.jpg
Quick View
, , ,
(E) Nissan Silvia S13 – 2 door – Full Cage (6 point) Bolt-in

Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), single door bars, roof reinforcement bars, windscreen pillar support bars, double diagonals through back stays.

  • High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Drifting, or ANDRA spec Drag Racing (down to 8.0 sec 1/4 mile)

$5,060.00 inc. gst
Quick View
, ,
(D) Ford Focus Mk2 RS – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, backstays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, and double 'X' door bars with gussets
  • Mid Level specification – State Level Race meetings 
  • NOTE:
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • This pricing includes the additional gussets where applicable.
$3,800.00 inc. gst
AGI - Nissan 180SX - 2019 CAMS spec State level Bolt-in Roll Cage - Option D
Quick View
, , ,
(D) Nissan Silvia S13 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), and double 'X' door bars with gussets.
  • Mid Level specification – State Level Race meetings or Drifting
$3,800.00 inc. gst
AGI - Nissan Skyline R31 - 2020 MA spec Basic 6pt Bolt-in - Option B
Quick View
, , ,
(B) Nissan Skyline R31 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, diagonal brace (through hoop), backstays, lateral bars (front legs), windscreen top cross bar, harness bar.
  • Entry Level specification – Super Sprints or Track Days
$2,200.00 inc. gst
Quick View
, , ,
(E) Nissan Skyline R31 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, backstays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, single door bars, roof reinforcement bars, windscreen pillar support bars. [PICTURE IS EXAMPLE ONLY]
  • High Level specification – National Level Race meetings, racing at Bathurst or ANDRA spec racing (down to 8.0 sec 1/4 mile)
$4,950.00 inc. gst
Quick View
, , ,
(C) Holden VU-VZ Ute – 6pt – Full Cage Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through back stays) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, and single door bars
  • Mid Level specification – State Level Race meetings or Drifting
NOTE:
  • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
  • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
  • This pricing includes the additional gussets where applicable.
$3,100.00 inc. gst
Quick View
, , , ,
(F) Porsche 911 – Full cage 6pt
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing through hoop, back stays, lateral bars (front legs), windscreen top cross bar, roof level double diagonals, harness bars with eye bolts through hoop (suit clip on harness), harness bar through low end of back stays (suit wrap around harness), double door bars, roof level double diagonals, windscreen pillar reinforcement bars, double diagonals in 'V' configuration through back stays.
  • High Level specification – National level Race meetings, National level Rally, Tarmac Rally events, or racing at Bathurst (for cars log booked after 2012). 
  • NOTE:
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • Pricing below includes the additional gussets where applicable.
$5,800.00 inc. gst
AGI - Nissan Skyline R32 - 2020 CAMS spec National level Bolt-in Roll Cage - Option F
Quick View
, , ,
(F) Nissan Skyline R32 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts fitted (suit clip on harness), double door bars with gussets, roof reinforcement bars, windscreen pillar support bars.
  • High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Gravel Rally, Tarmac Rally events such as Targa Tasmania, Drifting, or ANDRA spec Drag Racing (down to 8.0 sec 1/4 mile)
$5,500.00 inc. gst
Quick View
, , ,
(E) Nissan Bluebird 910 – 4 door – Full Cage (6 pt) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop), back stays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, single door bars, roof reinforcement bars, windscreen pillar support bars. [PICTURE IS EXAMPLE ONLY]
  • High Level specification – National Level race meetings, Drifting or ANDRA Drag Racing (down to 8.0 sec 1/4 mile). 
$5,060.00 inc. gst
Quick View
, , ,
(E) Nissan Skyline R34 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, backstays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, single door bars, roof reinforcement bars, windscreen pillar support bars. [PICTURE IS SAMPLE ONLY]
  • High Level specification – National Level race meetings, Drifting or ANDRA spec Drag racing 
$4,950.00 inc. gst
AGI - Nissan Pulsar N14 - 2021 MA spec Basic 6pt Bolt-in Roll cage - Option B
Quick View
, , ,
(B) Nissan Pulsar N14 – 6 pt – Full cage – Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, single diagonal brace (through hoop), back stays, lateral bars (front legs), windscreen top cross bar, harness bar.
  • Entry Level specification – Super Sprints or Track Days
     
$2,200.00 inc. gst
Quick View
, , ,
(B) Nissan Skyline R34 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, diagonal brace (through hoop), backstays, lateral bars (front legs), windscreen top cross bar, harness bar.
  • Entry Level specification – Super Sprints or Track Days 
$2,200.00 inc. gst
Quick View
, , ,
(D) Mini (Classic) – Full cage 6pt Bolt-In
  • Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, back stays, lateral bars (front legs),  windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), double door bars with gussets.
[PICTURE IS EXAMPLE ONLY]
  • Mid Level specification – State Level Race meetings
  • NOTE:
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • Pricing below includes the additional gussets where applicable.
    • Weld-in mounts
$4,100.00 inc. gst
Nissan Skyline R34 2dr - Roll Cage - option A
Quick View
, , ,
(A) Nissan Skyline R34 – 2 door – Half Cage (4 point) Bolt-in
Half Cage (4 point) Bolt-in – Main Hoop, diagonal brace (through hoop), backstays and harness bar.
  • Entry Level specification – Super Sprints, Track Days or Drifting
$1,300.00 inc. gst
Quick View
, , ,
(B) Nissan Silvia S14 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, diagonal brace (through hoop), back stays, lateral bars (front legs), windscreen top cross bar, harness bar, single door bar.
  • [PICTURE IS SAMPLE ONLY]
  • Entry Level specification – Sprints, Track Days or Drifting
$2,695.00 inc. gst
Quick View
, , ,
(A) Toyota 86 – 4pt – Half cage – Bolt-in
Half Cage (4 point) Bolt-in – Main Hoop, single diagonal brace (through back stays), back stays and bent back harness bar.
  • Entry Level specification – Sprints, Track Days or Drifting
  • NOTE:
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • Pricing below includes the additional gussets where applicable.
     
$1,750.00 inc. gst
Quick View
, , ,
(A) Nissan Skyline R32 – 4 door – Half Cage (4 point) Bolt-in
Half Cage (4 point) Bolt-in – Main Hoop, diagonal brace (through hoop), backstays and harness bar. [PICTURE IS SAMPLE ONLY]
  • Entry Level specification – Super Sprints, Track Days or Drifting
$1,300.00 inc. gst
Quick View
, , ,
(B) Nissan Silvia S13 – 2 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, single diagonal brace (through hoop), back stays, lateral bars (front legs), windscreen top cross bar, harness bar, single door bar. [PICTURE IS SAMPLE ONLY]
  • Entry Level specification – Sprints, Track Days or Drifting
$2,695.00 inc. gst
AGI-Nissan-Skyline-R34-4dr-2016-CAMS-Half-cage-Bolt-in-Option-A-floor-pic-front
Quick View
, , ,
(A) Nissan Skyline R34 -4 door – Half Cage (4 point) Bolt-in
Half Cage (4 point) Bolt-in – Main Hoop, diagonal brace (through hoop), backstays and harness bar.
  • Entry Level specification – Super Sprints, Track Days or Drifting
$1,300.00 inc. gst
AGI - Ford Focus Mk2 RS - 2016 CAMS National level Bolt-in Roll Cage - Option F (floor pic - side)
Quick View
, ,
(F) Ford Focus Mk2 RS – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, double 'X' door bars with gussets, roof reinforcement bars, windscreen pillar support bars including gussets between pillar bar and door bars, and double diagonals through back stays.
  • High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Tarmac Rally events such as Targa Tasmania, Gravel Rallies and ANDRA spec Drag racing (down to 8.0 sec down the 1/4 mile). 
  • NOTE:
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • This pricing includes the additional gussets where applicable.
$5,500.00 inc. gst
AGI - Nissan Skyline R31 - 2020 MA spec State level Bolt-in - Option C
Quick View
, , ,
(C) Nissan Skyline R31 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal brace (through hoop) with gussets, backstays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, and single door bars
  • Mid Level specification – State Level race meetings or Drifting 
$3,100.00 inc. gst
AGI - Nissan Silvia S13 - 2020 CAMS spec Bolt-in Half cage - Option A
Quick View
, , ,
(A) Nissan Silvia S13 – 2 door – Half Cage (4 point) Bolt-in
Half Cage (4 point) Bolt-in – Main Hoop, single diagonal brace (through hoop), back stays and harness bar.
  • Entry Level specification – Sprints, Track Days or Drifting
$1,300.00 inc. gst
Quick View
, , ,
(F) Nissan Skyline R34 – 4 door – Full Cage (6 point) Bolt-in
Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop), back stays, lateral bars (front legs), windscreen top cross bar, harness bar with eyelets, double door bars, roof reinforcement bars, windscreen pillar support bars. [PICTURE IS SAMPLE ONLY]
  • High Level specification – National Level Race meetings, National Rallies, Tarmac Rally events or Drifting
$5,500.00 inc. gst
AGI - Mini (BMC) - 2020 CAMS spec National level Bolt-in Roll Cage - Option F.
Quick View
, , ,
(F) Mini (Classic) – Full cage 6pt Bolt-In
  • Full Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop) with gussets, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), double door bars with gussets, roof reinforcement bars, windscreen pillar support bars including gussets between pillar bar and door bars.
  • High Level specification – National Level Race meetings, racing at Bathurst (for cars log booked after 2012), Gravel Rallies, or Tarmac Rally events such as Targa Tasmania
  • NOTE:
    • All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
    • Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
    • Pricing below includes the additional gussets where applicable.
    • Weld-in mounts
$5,800.00 inc. gst

SEARCH BY VEHICLE MAKE & MODEL

SERVICES

We can design and build a Roll Over Protection Structure for almost any vehicle. We design to meet the requirements of CAMS or to regulations required by the ANDRA. Through our Race division, AGI SPORT specialises in the preparation, set-up, engineering and management of cars for professional and non-professional race drivers.

ABOUT

AGI Precision Roll Cages are the flagship of the AGI brand. Precision engineered and built to the most stringent quality standards AGI Precision Roll Cages understand each of the singular requirements for all the different motorsport disciplines and work with you to find the best solution for your roll cage needs.

HISTORY

AGI founder and Managing Director Adam Gotch has over 25 years of experience across the highest levels of motor racing and vehicle fabrication. Adam spent eleven years on the European motor racing scene including time as a Grand Prix Mechanic with the BMW Williams Formula 1 team and as a Team Manager in the A1GP ‘World Cup of Motorsport’.

CONTACT US

Contact us to discuss your specific requirements. Our specially designed roll cage jig not only permits for greater precision and repeatability of each individual design but it allows us to pre-drill the roll cage connectors to their matched roll bar, something not all kit suppliers deliver.

Call Us (02) 9605 4411 | Buy Roll Cages Online| © AGI ENGINEERING & TECHNOLOGY GROUP PTY LTD

Find-On-Facebook

Privacy | Terms | Refunds | Despatch & Deliveries | Website Built by Social Tap
Google Analytics & reCAPTCHA are used on this site - view Privacy & Terms | Opt Out

close